Silent Call Communications SD4-SS Manuel d'instructions télécharger pdf (Page 14)

General Information

Before installing detectors, please thoroughly read these installation

instructions and NFPA 72, which provides detailed information on

detector spacing, placement, zoning, wiring, and special applications.

NOTICE: This manual should be left with the owner/user of this

equipment.

IMPORTANT: This detector must be tested and maintained regularly

following NFPA 72 requirements. The detector should be cleaned at

least once a year.

General Description

The Model #SD4-SS photocell electronic smoke detector with

built-in wireless transmitter is intended for use with Silent Call

Signature Series receivers models W08-SS, WCV08-SS & SK2-SS.

The transmitter will send alarm condition messages to the system’s

receiver. Refer to the wireless system’s instructions for the maximum

number of transmitters that can be supported.

The Model #SD4-SS incorporates a state of the art optical sensing

chamber and an advanced microprocessor. The microprocessor allows

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Pas de commentaire

Silent Call Communications SD4-SS Manuel d'instructions Page 14